A trailer has its own test, its own inspection record and its own compliance history, and it spends its life being hooked to whichever unit is free. That is exactly why trailers get neglected.
Brakes, brakes, brakes
Trailer annual test failures are more concentrated than vehicle failures. Brake systems and components come first, then service brake performance, then parking brake performance. The top three reasons a trailer fails are all the same system.
There is a reason for that beyond neglect. A trailer's braking is only ever tested properly when something measures it. A driver feels the combination stop; they do not feel whether the trailer is contributing its share or whether the unit is doing the work for both. A trailer can be badly out and nobody in the cab will know until a roller brake test says so.
Which is the argument for metered brake testing at every safety inspection rather than only at the annual test — the case for that is in brake performance testing at every safety inspection.
Why laden testing matters more on trailers
An unladen trailer is a light, high-sided box. Test its brakes empty and the figures can look acceptable on a trailer that will not make the numbers loaded, because the relationship between the two is not a simple ratio.
It is why we keep a loaded trailer and an on-site loading facility: so a trailer can be brake tested laden, where the result means something, rather than tested empty and hoped about.
What gets missed on trailers specifically
- The coupling. Fifth wheel wear, kingpin wear, the locking mechanism, and the condition of the air lines and the electrical suzie. All of it moves constantly and none of it belongs to anyone in particular.
- EBS and ABS faults. A warning lamp on the trailer is easy to ignore from the cab, and a trailer EBS fault is a prohibition waiting to happen.
- Brake linings and drums, which wear unevenly across axles when one is doing more work than the others.
- Suspension. Air springs, shock absorbers, axle alignment — and misalignment shows up first as tyre wear, which gets blamed on the tyres.
- Lighting and markers, the most commonly reported defect on any trailer and the easiest to fix.
- Floor, body and landing legs. Not glamorous, and a failed landing leg is a serious incident.
- Corrosion of the chassis, which is slow, invisible from a distance, and exactly the sort of long-term defect that attracts an S mark.
The record keeping is separate
This is where fleets come unstuck administratively. A trailer needs its own safety inspection record, at its own declared interval, whichever unit happened to pull it.
Three things follow:
- Trailers count on your operator's licence and need inspecting at the interval you declared for them
- Any trailer or vehicle 12 years or older has a suggested interval of 6 weeks in DVSA's Guide to Maintaining Roadworthiness, and trailers routinely outlive the units that pull them
- A trailer that has been off the road, hired in or borrowed needs a first use inspection before it goes back to work — which is not the same thing as a driver's walkaround check
Our guide to inspection intervals covers how those are set, and what to keep covers the paperwork.
Spare trailers are the risk
The trailer that gets used every day gets looked at every day. The spare in the corner of the yard — brought out when something breaks or a peak hits — is the one that goes out with flat-spotted tyres, seized brakes and a dead lighting circuit.
Two habits fix most of it: put the spares on the same inspection planner as everything else, and treat bringing one back into service as a first use inspection rather than a quick look round.
Trailer work at CFM
We carry out safety inspections on curtainsiders, boxes, flats, tippers and the rest, with roller brake testing on our own lanes, laden where it needs to be. Repairs cover running gear, brakes, lighting and bodywork, and annual testing runs on our two ATF lanes with the repair shop next door — which on a trailer usually means a failure item is put right the same day rather than booked back in.
If you are presenting a trailer for test, the failure data is worth a read first. It is mostly brakes.
Book in at Keighley
CFM runs a two-lane DVSA Authorised Testing Facility, a DVSA-approved tachograph centre and an IRTE-accredited workshop at Parkside Works, Parkwood Street, Keighley BD21 4PJ. We are open 07:00–17:00 Monday to Friday and 07:00–12:00 on Saturday, and we cover Airedale, Bradford, Wharfedale, Craven and Leeds.
Call 01535 662706 or send us an enquiry — tell us the vehicle and what you need, and we will confirm the earliest available slot.





