Skip to content
CFM Limited logo

Compliance

Driver walkaround checks: what DVSA expects

3 min read

At least one walkaround check in every twenty-four hour period a vehicle is in service, carried out preferably immediately before it is used. That is the standard, and it applies to vans as much as to tractor units.

The rule in plain terms

DVSA's guidance on daily HGV walkaround checks — with separate versions for vans and buses and coaches — sets out three things that matter:

  • The driver, or a designated responsible person, checks the vehicle before it goes on the public highway
  • At least one check happens in every 24-hour period the vehicle is in service, preferably right before use
  • Anything that makes the vehicle unroadworthy is rectified before it is used again

A check that is not written down did not happen

Defects have to be reported in writing to whoever is responsible for dealing with them, and where it is practicable the system should include nil reporting — a record saying the check was done and nothing was found.

Nil reporting is the part operators skip, and it is the part that protects them. Without it there is no difference, on paper, between a driver who checked the vehicle and found it sound and a driver who did not check it at all. Those reports then have to be kept for fifteen months, along with any record of repair, which we cover in our post on what to keep for your O-licence.

What a meaningful check covers

The exact list varies by vehicle type, but the shape is the same. Outside and underneath first:

  • Lights, indicators, markers and reflectors — all of them, lit
  • Tyre condition, tread, pressure and any sign of damage to the sidewall
  • Wheel fixings and any loose or missing nuts, and the wheel nut indicators if fitted
  • Bodywork, doors, security of the load and any sheeting or straps
  • Visible leaks underneath — oil, fuel, coolant, air
  • Spray suppression, mirrors, glass and the number plate
  • Coupling security and the condition of air lines and electrical connections

Then in the cab:

  • Warning lights that stay on after the bulb check
  • Steering play, and brake pedal and air pressure build-up
  • Mirrors and view of the road, wipers and washers, horn
  • Seatbelts, and the tachograph showing the correct time and recording

The first use inspection is a different thing

These get confused. A first use inspection is what you do when a vehicle or trailer comes to you leased, hired, borrowed, or back after a long period off the road. It is a proper inspection, not a walkaround, and it matters most on exactly the vehicles nobody has been watching.

Where the daily check meets the workshop

A walkaround check is a snapshot by someone standing next to the vehicle. It will not find a brake imbalance, a worn kingpin or a chassis crack starting under the paint — that is what the safety inspection is for, and why the interval between inspections matters as much as the daily check does.

The two work together. Drivers reporting the same defect repeatedly is one of the clearest signals that an inspection interval needs shortening, which we look at in how often your vehicles should be inspected.

When a driver does report something, we can usually get it looked at quickly — our workshop handles commercial vehicle repairs on rigids, tractor units, trailers and PSVs, and van servicing and repairs for light commercial fleets.

Book in at Keighley

CFM runs a two-lane DVSA Authorised Testing Facility, a DVSA-approved tachograph centre and an IRTE-accredited workshop at Parkside Works, Parkwood Street, Keighley BD21 4PJ. We are open 07:00–17:00 Monday to Friday and 07:00–12:00 on Saturday, and we cover Airedale, Bradford, Wharfedale, Craven and Leeds.

Call 01535 662706 or send us an enquiry — tell us the vehicle and what you need, and we will confirm the earliest available slot.

Vehicle off the road? Let's get it moving.

Call the workshop or send us the details. We'll give you a clear quote and the earliest slot we can.

Call now Get a quote